Contact Us

Egypt

Cairo Head Office


Saudi Arabia

Riyadh Office

Hotel lobby with travertine columns and a sculptural pendant

Lighting design

Interior and Architectural Lighting Design, Drawn with the Ceiling

Lighting is the cheapest part of a project to specify and the most expensive to correct. We get circuits, colour temperature and beam angles right on the drawing, and the space does the rest.

  • ISO 9001:2015Certified quality management
  • LLA 2022Luxury Lifestyle Awards winner
  • 2Offices: Cairo and Riyadh
  • 3Markets: Egypt, KSA, UAE
Visualisation

Good lighting design is why one room feels calm and another flat with exactly the same finishes. We treat it as a discipline of its own — layers, fittings, circuits and control — drawn with the ceiling, the joinery and the MEP, never added to them afterwards.

Lighting was part of our scope on Hassan Café in Riyadh (400 m²), on Villette Residence in New Cairo (300 m²), and on the four main gates of Lina Farm in 6th of October City, where lighting and electrical works were built into the gate design. Fittings and controls are specified from suppliers we work with, including Asfour Crystal, HDL and Schneider Electric.

Project proof

Named projects behind the work

Figures, roles and status from NoVi's 2026 corporate portfolio. Images are original visualisations inspired by each project, not site photographs.

  • Visualisation: Hassan CaféVisualisation

    400

    Hassan Café

    Riyadh

    Interior design, FF&E, lighting, custom joinery and 3D visualisation

  • Visualisation: Talisman HotelVisualisation

    940

    Talisman Hotel

    Zamalek, Cairo

    Reception, restaurant and waiting area in modern luxury

  • Visualisation: Fairmont Nile CityVisualisation

    Fairmont Nile City

    Cairo

    Lobby and lounge interiors, “Natural Elegance and Contemporary”

Restaurant with walnut booths, a vaulted ceiling and an onyx coffee counter
Visualisation

01Lighting Design

Lighting plans, fixtures and control in one scope

  1. Concept and layers

    Ambient, task, accent and decorative layers set room by room, so one space can be bright by day and warm by night.

  2. Reflected ceiling plans

    Every fitting placed against the ceiling design, furniture layout and AC openings, at distances that wash walls evenly.

  3. Fixture specification

    Lumen output, colour temperature, colour rendering, beam angle, dimming type and IP rating for each fitting.

  4. Circuits, scenes and dimming

    Circuits grouped by scene rather than by wall, ready for smart home control if wanted.

  5. Façade and landscape lighting

    Grazing, up-lighting, entrances, gates and garden paths, coordinated with the landscape design.

  6. Decorative pieces

    Chandeliers and pendants sized to the room and the ceiling height, with fixing and power planned in advance.

Nile-view hotel suite with a walnut headboard at dusk
Visualisation

02Lighting Design

Interior lighting design for villas and apartments

In a home, lighting earns its keep in four places: the majlis or reception, the staircase, the dining table and the façade. Concealed cove and profile lighting, the detail clients ask for most, works only when the gypsum detail leaves room for the strip and its driver, which is why we draw them together.

Warm colour temperatures flatter wood, stone and skin; high colour rendering keeps marble and fabrics true. See how this plays out in our villa interiors and read lighting in interior design.

03Lighting Design

Hospitality, restaurant and retail lighting

  • Cafés and restaurants — the lighting sets the pace of the room: even for a fast counter, low and layered for evening dining. See restaurants and cafés.
  • Hotel lobbies and rooms — scenes that shift from day to night, and bedside control guests understand without instructions.
  • Retail and showrooms — display beams and colour rendering matched to jewellery, fabric or cosmetics, with contrast that draws shoppers inward.
  • Façades and gates — architectural lighting that gives a building or entrance its night identity.

04Lighting Design

How a lighting design project runs

  1. Brief and daylight review

    How each space is used through the day, where daylight enters and what the design should emphasise.

  2. Concept and samples

    A colour-temperature strategy and, where it matters, a sample fitting tested on site before bulk orders.

  3. Drawings and schedules

    Lighting layout, circuits and switching, and a fixture schedule with quantities for the BOQ.

  4. Setting out on site

    Positions marked on the ceiling before cutting, coordinated with gypsum, joinery and AC.

  5. Night focusing

    Spots aimed, dimming levels set and scenes saved after dark, before handover.

05Lighting Design

Lighting design in Egypt, Saudi Arabia and the UAE

We design lighting for homes and commercial spaces in Cairo, New Cairo, Sheikh Zayed and the North Coast from our head office, and across the Kingdom from our Riyadh office in Al Olaya; clients in Dubai and Abu Dhabi are served from both. We specify fittings that are genuinely available and supported in each market, because a fixture with no local stock is a risk, not a specification. Book a site survey.

Questions

Frequently asked questions

Straight answers to what clients ask us before a site survey. Not covered here? Ask the team directly.

Ask the team

When should lighting design start?

At the interior layout stage, before ceilings and electrical drawings are fixed. Once cabling is pulled and gypsum is closed, changes cost far more and options narrow.

What colour temperature suits a home?

Warm white suits living areas and bedrooms, while slightly cooler light can work in kitchens and dressing areas. The key is consistency within one room, which we fix in the fixture schedule.

Can you design concealed and cove lighting?

Yes. We detail the gypsum cove or profile with the LED strip, driver access and dimming type, so the line reads evenly without visible dots or dark gaps.

Can the lighting be controlled from an app?

Yes, if the circuits and dimming are planned for it. We group circuits into scenes and coordinate with the smart home system so control is simple for everyone at home.

Do you design façade lighting?

Yes. We light façades, entrances, gates and gardens as part of the architectural and landscape design, balancing effect with glare control and neighbours.

Can you relight an existing space?

Often, yes. We survey existing circuits and ceilings, then propose what can change with minimal opening up — new fittings, drivers and dimming — as part of a renovation or on its own.

Start a project

Your space, in its best light

Send the plans or photos and tell us how the space is used. We will propose a lighting scope, deliverables and a consultation date.